Page 1
Installation and Operating Guide 26LH1DC3 26LH1DC4 26LH1DC5 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE (LG Electronics U.S.A., Inc.,) (2000 Millbrook Drive) (TELEPHONE NO:1-847-941-8000)
Page 3
CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. CAUTION THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE...
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7 . Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
To perform a normal installation set up, you need an installer's remote and the LT2002 Quickset II Clone Programmer – both are shown and described in later sections. See your LG dealer if you wish to purchase the Installer remote and LT2002. The installer remote allows access to the Installer menus, User menus in the Manual Channel Set options on the Setup menu.
FRONT PANEL INFORMATION Here shown may be somewhat different from your TV. Using the front control panel to operate the TV. Front Panel Controls Remote Control Sensor TV Operation Press the P P O O W W E E R R button to turn the TV on from standby mode.
PREPARATION BACK PANEL INFORMATION Here shown may be somewhat different from your TV. Back Connection Panel AUDIO/ VIDEO 2 (SIDE AUTO- CAMPORT) RS-232C SELECT SWITCH UPDATE SWITCH RS-232C PORT PC IN HDMI/DVI IN DVI/PC AUDIO IN NOTE RS-232C, Update Switch and RS-232C Select Switch are reserved for qualified and authorized service and technical support personal only.
VESA WALL MAUNTING Here shown may be somewhat different from your TV. There are several Vesa standard mounts available that can be used with this TV. The mount shown to the right would be installed on the TV back using required bolts in the four pre-threaded holes provided.
EXTERNAL EQUIPMENT SETUP ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket) Antenna Socket Outdoor...
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. When connecting Component cable 1.
Page 12
EXTERNAL EQUIPMENT SETUP When connecting HDMI cable 1. How to connect Connect the digital set-top box to H H D D M M I I / / D D V V I I I I N N jack on the set. No separated audio connection is necessary.
Page 13
When connecting HDMI to DVI cable When connecting HDMI to DVI cable 1. How to connect Connect the DVI output of the digital set-top box to the H H D D M M I I / / D D V V I I I I N N jack on the set. Connect the audio output of the digital set-top box to the D D V V I I / / P P C C A A U U D D I I O O I I N N jack on the set.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting Component cable 1. How to connect Connect the video outputs (Y, PB, PR) of the DVD to the C C O O M M P P O O N N E E N N T T ( ( D D V V D D / / D D T T V V ) ) 1 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red).
Page 15
When connecting with an S-Video cable 1. How to connect Connect the S-VIDEO output of the VCR to the S S - - V V I I D D E E O O input on the set. Connect the audio outputs of the VCR to the A A U U D D I I O O input jacks on the set.
EXTERNAL EQUIPMENT SETUP VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.
Page 17
When connecting with a RCA cable 1. How to connect Connect the V V I I D D E E O O 1 1 jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 2.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect Connect the V V I I D D E E O O 2 2 jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) 2.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15pin cable 1. How to connect Connect the RGB output of the PC to the P P C C I I N N jack on the set.
Page 20
EXTERNAL EQUIPMENT SETUP NOTE To get the the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode.
SCREEN SETUP FOR PC MODE Overview When the RGB input of the set is connected to a PC output, select the RGB-PC as the main input mode. When HDMI/DVI connect to PC output and select HDMI/DVI input, this function is used. After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
EXTERNAL EQUIPMENT SETUP DVI HOOKUP TO RJP OR DVD PLAYER 1. How to connect Locate the DVI out port on the RJP (Remote Jack Pack) or DVI device. Connect a DVI cable between the RJP and DVI in port on the TV. If required, make Audio connections as indicated to the right.
WATCHING TV / CHANNEL CONTROL USER REMOTE CONTROL BUTTON FUNCTIONS A brief list of the buttons on the optional user’s remote and what they do. MUTE Turns sound Off and On, while the picture remains. TV/AV Displays a menu of all available input sources.
WATCHING TV / CHANNEL CONTROL INSTALLER REMOTE CONTROL BUTTON FUNCTIONS A brief list of the buttons on the optional installer’s remote and what they do. POWER Turns TV On or Off. CC (Closed Captioning) Press to access closed captions. TV/FM Not application VOLUME (-/+) Decreases/increases sound level.
ON-SCREEN MENUS SELECTION Use the remote keys indicated below to access these menus and displays. In this manual, the OSD (On Screen Displays shown) may be different. The following are just generic examples to familiarize you with the TVs options. Volume Display Press VOLUME.
WATCHING TV /CHANNEL CONTROL CHANNEL SEARCH Auto Program (Channel Search) Use Auto Program to automatically find and store all of the channels available in the selected Tuning Band. NOTE Tuning Band must be set before doing the channel search. See Installer menu item 003 Band/AFC. Default setting is 1, for CATV.
Channel List After the channel search, remove unwanted channels. Press the M M E E N N U U button and then use the A A D D J J button to highlight the C C h h a a n n n n e e l l menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
WATCHING TV /CHANNEL CONTROL Channel Labels Setup Channel Labels help the user identify the channel or network being viewed. In the Setup menu with the Channel Labels option highlighted, use the A A D D J J D D E E F F G G available channel labels, such as, A&E, AMC, ESPN, HBO, etc.
Unstable Screen If a dashed line or no color appears, the screen is unstable, therefore try channel adjustments. (This is only available for analog broadcasting.) Press the M M E E N N U U button and then use the A A D D J J button to highlight the C C h h a a n n n n e e l l menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
TIME SETTING CLOCK SETTING Manual Time Settings D E F G Use the A A D D J J hours and minutes. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
Automatic Time Settings If you select auto time setting, time will be set from the digital broadcast information. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
TIME SETTING Daylight Saving Installer can select to use Daylight Savings to adjust the clock time. This is operated from the Automatic Time Settings. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
TV Activation Time Settings You can set a time for the TV to automatically turn-on. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
TIME SETTING Auto Off If there is no signal on the TV for 15 minutes or more, or if no button is pressed for more than 3 hours, this function turns off the TV automatically. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
PARENTAL CONTROL/RATINGS SET PASSWORD & LOCK SYSTEM Entering a PIN (Password) This option sets up or changes the password for blocking program ratings. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
Page 36
PARENTAL CONTROL/RATINGS Set Block Hour. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
MOVIE & TV RATINGS TVPG Ratings You can block programs based on the TV program rating. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
PARENTAL CONTROL/RATINGS MPAA Ratings Restricting movies by their rating. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
Canadian English Ratings Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
PARENTAL CONTROL/RATINGS L L o o c c k k m m e e n n u u - - D D o o w w n n l l o o a a d d a a b b l l e e R R a a t t i i n n g g in the CD manual is added by the information presented here. Your TV’s OSD (On Screen Display) may differ slightly from what is shown in this manual.
SOUND & LANGUAGE CONTROL CAPTION / TEXT Turn Captions On/Off NOTE Pressing CC on the remote to select a captions option will also turn closed captions on. Press the M M E E N N U U button and then use the A A D D J J button to highlight the C C a a p p t t i i o o n n menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
SOUND & LANGUAGE CONTROL Digital Captions Mode Digital Captions only appear on digital channels, tune in a digi-tal channel that is actually broadcasting digital captions. NOTE Pressing CC on the remote selects a captions option. Press the M M E E N N U U button and then use the A A D D J J button to highlight the C C a a p p t t i i o o n n menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
Preset Sound Settings Match the sound mode to the program’s character, Music, Movie, Sports, or News. (This is Feature operates only in DTV mode.) Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S o o u u n n d d menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
SOUND & LANGUAGE CONTROL Sound Balance Setup Adjust the speaker balance for optimum sound quality. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S o o u u n n d d menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
Automatic Volume Control Settings Have the TV automatically maintain the sound level between different channels. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S o o u u n n d d menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
SOUND & LANGUAGE CONTROL Digital Audio Language Settings You can set digital audio language. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S o o u u n n d d menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
Menu Language The menus can be shown on the screen inter selected language. First select your language. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
SOUND & LANGUAGE CONTROL Menu Transparency Settings Menu Transparency sets the background transparency of the menu. Press the M M E E N N U U button and then use the A A D D J J button to highlight the S S e e t t u u p p menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
PICTURE CONTROL PRESET PICTURE SETTINGS Picture - Preset Set the picture mode to the program content, e.g. Dynamic or Mild etc. Press the M M E E N N U U button and then use the A A D D J J button to highlight the P P i i c c t t u u r r e e menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
PICTURE CONTROL Manual Picture Adjustment To make custom picture settings, set the Mode to Manual on the menu. Use the Manual settings for the best presentation of movies. The patient will then be able to view movies with more realism. Press the M M E E N N U U button and then use the A A D D J J button to highlight the P P i i c c t t u u r r e e menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
Noise Reduction The user can watch movies with a more realistic picture on analog channels. Press the M M E E N N U U button and then use the A A D D J J button to highlight the P P i i c c t t u u r r e e menu and press the O O K K ( ( E E n n t t e e r r ) ) button.
If the Master TV display panel’s clonable features like: Clock Set, adding channel icons and channel labels, etc. are not done properly, then the cloned 26LH1DC3/4/5 TVs will all have problems. For example, do not do 2-5-5 + Menu more than once or the TV setup will become corrupted. If...
COMMERCIAL MODE SETUP This page provides an overview of the TV configuration. See the pages listed below for more specific, detailed instructions at each step; how to access and use the Installer menu etc. *Note1: Disconnect all Aux inputs. Under certain conditions, Auto Program (Channel search) is disabled if there is an Aux input active.
*Note1: It is assumed that the 26LH1DC3/4/5 is connected to a signal source, the source selected is Antenna (RF) In, the signal is from an Analog channel, not a digital channel, all equipment is connected to power and turned on and the LT2002 Clone Programmer main menu (THE CLONE HAS CONTROL OF THE TV) menu is displayed on the TV screen, the clone programmer LED is blinking the required heart beat pattern, see above and next page.
CLONE PROGRAMMER LEARNING SETUP Learning the Master TV Setup Instructions for the Clone Programmer to Learn the Master 26LH1DC3/4/5 Setup. Use MPI Cable to Connect LT2002 Clone Programmer to Master 26LH1DC3/4/5 MPI Port If there is a good connection, “THE CLONE HAS CONTROL OF TV”...
COMMERCIAL MODE CLONING CONNECTIONS/TEACHING SETUP Teaching the Master Setup to Another 26LH1DC3/4/5 - Connections for the LT2002 to Teach another 26LH1DC3/4/5 the Master Setup Antenna or CATV Teach Master 26LH1DC3/4/5’s Setup to the target 26LH1DC3/4/5 After learning is complete, remove the M.P.I. cable from the...
Page 57
- Use the Installer’s Menu to set up or change operational settings. See more detailed descriptions of the Installer menu items on the following pages... Accessing the Installer’s Menu Make sure TV is on. Installer’s menu items can be accessed by using an installer’s remote control.
COMMERCIAL MODE INSTALLER MENU - Installer Menu Items 035 through 1 17 Menu Item Function COMPPORT EN. YPrPb EN. REAR AUX EN AUTO CAMPORT STRT AUX SRCE AUX STATUS DIS. CH-TIME EN. CH-T COL. FOR. CH-TIME BCK. CH-TIME CH NOT AVBLE REVERT CH UPN MSB UPN MSB-1...
Page 59
Use ADJ Left/Right arrow to choose 0 or 1 where 0 is the default is Off, and 1 is On. *Note: f set to 1 (On), the 26LH1DC3/4/5 does not respond to On/Off commands from either the remote or the display control panel, and the SLEEP TIMER is also nonfunctional.
Page 60
008 MIN VOLUME is also set at 0. Change values with ADJ Left/Right arrow keys. It may be best to set the same value on every 26LH1DC3/4/5. *Note: The maximum volume level cannot have a value setting lower than the MIN VOLUME level (described previously).
Page 61
INSTALLER MENU 053 - DIS. CH-TIME (Disable Channel-Time) Set to 1 to disable the Channel-Time display, Channel-Time display will not appear. Set to 0 to enable the Channel-Time display. 069 - EN. CH-T COL. (Enable Channel-Time Custom Color) Set to 1 to enable custom color for the Channel-Time display.
Page 62
COMMERCIAL MODE (Continued from previous page) 094 - SAP MENU EN (2nd Audio Program) Set to 1 to enable SAP feature, if available. Set to 0 to disable SAP feature. 096 - DEF. ASP. RATIO (Default Aspect Ratio) Selects default aspect ratio at power up, see settings below.
PEFERENCE TV Features / Menus that can be Cloned Channel Picture Auto Program Mode (Active channels Contrast found with the Brightness channel search) Color Channel Labels Sharpness Channel List Tint Fine Tune Color Temperature Screen Format Film Mode *Note: For Digital Font Options, if any default setting is left unchanged prior to cloning, then all the digital font options wil be set to default settings.
Page 64
Editing and adding the labels can only be done if there are channels entered into the 26LH1DC3/4/5’s channel map either by using the method described in item 6 (page 64), by cloning or by the use of the master remote control from the PPV provider.
Page 65
26LH1DC3/4/5 Installer menu and make changes to the default values as required. If necessary, familiarize yourself with the 26LH1DC3/4/5 Installer menu and how to make and save changes in the menu, before attempting to clone the 26LH1DC3/4/5 Master TV setup.
Page 66
Procedure to Check Software Version The software version of the 26LH1DC3/4/5 may be checked by accessing the INSTALLER MENU. To do this, press the MENU button at least 10 times until the menu display ceases to respond to MENU key presses.
Page 67
PEFERENCE 26LH1DC3/4/5 Camport Auto Sense Operation The CAMPORT Auto Sense function is enabled when: 1. Installer Menu Item 34, CAMPORT EN is set to 1 AND 2. Installer Menu Item 40, AUTO CAMPORT is enabled (1). Selectable= Can be accessed with TV/AV key, direct access, etc.
Page 68
COMMERCIAL MODE PEFERENCE 26LH1DC3/4/5 Aux Input Configuration 26LH1DC3/4/5 Aux Input Configuration DIRECT ACCESS 26LH1DC3/4/5 Tuning OLD_OCV OLD_OCV Source Input Source Mode Number Video2 (Front) Video1(Rear) Component 2 DVI/HDMI1 RGB1 Video 3 Component1 ENABLE MPI DATA STATUS TYPE Installer Menu 0x41 SOURCES...
Display Panel Picture No picture Turn TV on. Display panel is turned off. Power failure? Antenna/Cable not Connect Antenna/Cable signal source to 26LH1DC3/4/5. connected. Connections incorrect. Check connections on 26LH1DC3/4/5. M.P.I. not connected. If applicable, connect M.P.I. cable to M.P.I. device.
No Information available display. Item 103 set to 1 physical channels tuning. *Note: For other problems not caused by the 26LH1DC3/4/5, refer to other devices’ operating guide. Adjust Installer menu settings as required. Remove TV power cord for 15 seconds.
Clone Programmer clock from a TV containing the correct time. Remote does not operate clone. Wrong Installer remote. Only use an appropriate Installer remote to operate clone programmer with 26LH1DC3/4/5. LED does not blink M.P.I. cord not connected. Connect M.P.I. cord.
Page 72
• After cloning operations are complete, just unplug the LT2002 from the 26LH1DC3/4/5. • If the 26LH1DC3/4/5 does not display a picture on the TV (blank screen) after a few seconds, just change channels. Try a different LT2002 Clone programmer.
The end looks like a hex-shaped nut with a wire sticking through the middle. It screws onto the Antenna/Cable threaded jack on the back of the 26LH1DC3/4/5. 300 TO 75 OHM ADAPTER A small device that connects a two-wire 300ohm antenna to a 75 ohm RF jack.
APPENDIX INSTALLER QUICK SETUP GUIDE Quick Setup Guide for Integrated Master TVs See table of contents for more information. LODGING PTC INSTALLER MENU INSTALLER SEQ 000-000-000-000 PTC V1.00.000 CPU V1.01.00 FACT DEFAULT BAND/AFC CH.OVERIDE Mode Standard Color Temperature Cool Screen Format 16:9 Noise Reduction Off Film Mode 11:20 PM...