LG 26LH1DC3 Installation And Operating Manual page 57

- Use the Installer's Menu to set up or change operational settings.
See more detailed descriptions of the Installer menu items on the following pages...
Accessing the Installer's Menu
Make sure TV is on. Installer's menu items can be accessed by using
an installer's remote control. Just press MENU repeatedly (at least 10
times) until the TV seems to stop responding, then press 9, 8, 7, 6,
then ENTER to access the Installer's menu. To remove the Installer's
menu, press ENTER again. Any changes you make will be stored in
nonvolatile memory. (The menu also disappears automatically.)
The Installer's menu opens with item 000 INSTALLER SEQ 000. Use
the Up/Down arrow buttons to sequence through the available menu
items. Or, access an item directly by keying in the line number, then
pressing MENU. For example, to access the Sleep Timer option
which is item 015, press 0-1-5, then MENU. To change a setting, use
the Left/Right arrow buttons. Or, enter a value directly.
Using the Installer's Menu
Items 000 ~ 1 17 are immediately accessible only upon entering the
Installer's Menu. Their numbers, descriptions, ranges, factory default
settings, and a place for listing any changes made on-site are given
below and on the following pages.
Installer Menu Items 000 through 1 17
Menu Item Function
000 INSTALLER SEQ
001 POWER MANAGE
002 AC ON
003 BAND/AFC
004 STRT CHANNEL
005 CHAN LOCK
007 STRT VOLUME
008 MIN VOLUME
009 MAX VOLUME
010 MUTE DISABLE
01 1 KEY DEFEAT
015 SLEEP TIMER
016 EN TIMER
017 ALARM
021 V-CHIP
022 MAX BLK HRS
023 CAPTION LOCK
028 CH. OVERIDE
029 OLD OCV
030 ACK MASK
031 POLL RATE
03 TIMING PULSE
034 CAMPORT EN
Value Range Default Value
0 ~ 3 0
0 ~ 7 0
0 / 1 0
0 ~ 3
1
0-125, 126, 127, 255 255
0 / 1 0
0 ~ 63, 255 255
0 ~ 63 0
0 ~ 63 63
0 / 1 0
0 / 1 1
0 / 1 1
0 / 1 0
0 / 1 1
0 / 1 1
0 ~ 99 12
0 / 1 0
0 / 1 1
0 / 1 0
0 / 1 0
20 ~ 169 94
186 ~ 227 207
0 / 1 1
LODGING PTC INSTALLER MENU
000 INSTALLER SEQ
UPN 000-000-000-000
PTC V1.00.000
Brief Description of Function and Comments
Leave default set to 0.
Sets number of hours of no activity before auto shut Off.
Set to 1 to enable auto turn On at power up.
Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC
Channel at turn-on (Set 255 to return to last channel before power Off).
If set to 1, cannot tune from current channel.
Sets Volume level at TV turn-on (Set 255 to retain last volume level).
Sets minimum allowable volume setting.
Sets maximum allowable volume setting.
Set to 1to disable mute function.
Set to 1 to disable menu navigation keys on display panel.
Set to 1 to enable Sleep Timer.
Set to 1 to enable On/Off Timers.
Set to 1 to enable Alarm.
Set to 1 to enable V-Chip functions.
Sets number of V-Chip (Parental Control) blocking hours.
Set to 1 to retain caption setting at power Off.
If set to 0, limits direct access to favorite channels.
Set to 1 to change M.P.I. operation to OCV.
If set to 1, changes M.P.I. for some OCV boxes.
Selects poll rate for M.P.I.
Sets baud rate for M.P.I.
Set to 1 to enable Video 2 input.
000
FPGA 09F1
CPU V1.01.00
Typical Installer Menu
57