Ford 2010 Crown Victoria Owner's Manual page 116

Seating and Safety Restraints
The SRS consists of the following items:
• Driver and passenger airbag modules (which include the inflators and
airbags)
• safety belt pretensioners
• Front passenger sensing system
• "Passenger airbag off" or "pass airbag off" indicator lamp. Refer to
Front passenger sensing system later in this chapter.
• Driver and passenger side airbags
• One or more impact and safing sensors
• A readiness light and tone
• A diagnostic module
• The electrical wiring which connects the components
The diagnostic module monitors its own internal circuits as well as the
supplemental airbag electrical system wiring (including the impact
sensors), the system wiring, the airbag system readiness light, the airbag
back up power and the airbag ignitors.
WARNING: Several air bag system components get hot after
inflation. Do not touch them after inflation.
WARNING: If the air bag has deployed, the air bag will not
function again and must be replaced immediately. If the air
bag is not replaced, the unrepaired area will increase the risk of injury
in a collision.
WARNING: If the safety belt pretensioners deploy in an
accident, they will not function again (belt will not extract or
retract) and must be replaced immediately. Failure to replace the
retractor assemblies will increase the risk of injury.
Front passenger sensing system
The front passenger sensing system is designed to meet the regulatory
requirements of Federal Motor Vehicle Safety Standard (FMVSS) 208
and is designed to disable (will not inflate) the front passenger's frontal
airbag under certain conditions.
The front passenger sensing system works with sensors that are part of
the front passenger's seat and safety belt. The sensors are designed to
116
2010 Crown Victoria (cro)
Owners Guide, 1st Printing
USA (fus)