Initial Setup For Ant./ Cable-Vcr-Tv Connection - Panasonic PV-VS4821-K Operating Instructions Manual

Initial Setup for ANT./ Cable - VCR - TV Connection
How to Connect
For Connection Type A [VCR-TV] .
1
Connect the Cable from Antenna/Cable to the IN FROM ANT. terminal on VCR.
Connect the OUT TO TV terminal on the rear of VCR to the ANT. IN terminal
2
on TV using the RF Cable (included accessory).
TV
VHF/UHF
How to do Initial Setup
1
Press VCR button* on the remote for VCR mode.
Turn the TV on and set it to channel 3.
2
Press POWER to turn VCR on.
3
Press CH
SELECT LANGUAGE
or
PRESS CH : ENGL I SH
Press CH
OPR I M I R CH : ESPAÑOL
APP. VCR / TV : FRANÇA I S
or
Press VCR/TV for French.
TO CHANGE VCR' S OUTPUT
CH, PRESS ACT I ON KEY.
to select language.
• When VCR is turned on for the first time, SELECT
LANGUAGE screen appears.
• If wrong language is set, or there is not Language
Display, do "Reset All VCR Memory Functions"
steps on page 11.
• If screen does not appear, check connection between
VCR and TV and, if TV is tuned to channel 3, try
switching it to channel 4.
• When you want to change the output channel of VCR,
please refer to VCR's Output Channel on page 17.
WARNING
When using "Nut type" RF coaxial cables, tighten with
fingers only. Overtightening may damage terminals.
10
VCR
IN FROM ANT.
1
OUT TO TV
2
for English.
for Spanish.
ANT./CABLE
POWER
VCR
VCR/TV
SELECT/
SET
:PLAY
:STOP
:REW
:FF
ACTION
CH /