Initial Setup For Ant./Cable-Vcr-Tv Connection - Panasonic OmniVision PV-V4611 Operating Instructions Manual

Initial Setup for ANT/Cable -VCR -TV Connection
How to Connect
Connect the Cable from Antenna/Cable to the IN FROM ANT.
terminal on VCR.
Connectthe OUT TO TV terminal on the rear of VCR to the ANT.
IN terminal on TV using the RF Cable (included accessory).
VCR
VHF/UHF
How to do Initial Setup
Press VCR* for VCR mode. Turn
the TV on and set it to channel 3.
Turn VCR on.
2 When VCR is turned on the first
time, SELECT LANGUAGE screen
appears.
SELECT LANGUAGE
PRESS CH å: ENGLISH
OPRIMA CH Y : ESPAÑOL
PP. VCFUTV | FRANCAIS
TO CHANGE VCR'S OUTPUT
CH, PRESS ACTION KEY.
lf screen does not appear, check
connection between VCR and TV
and, if TV is tuned to channel 3, try
switching it to channel 4.
+ When you want to change the output
channel of VCR, please refer to VCR's
Output Channel on page 13.
If wrong language is set, do "Reset All
VCR Memory Functions" steps on
page 9.
WARNING
When using "Nut type" RF coaxial cables, tighten with fingers
only. Overtightening may damage terminals.
IN FROM ANT.
EA ANT./CABLE
OUT TO TV
Press CHA to select English.
or
Press CHY to select Spanish.
or
Press VCR/TV key to select French.
When one of above keys is pressed,
SELECT CONNECTION screen is
displayed in the selected language.
[ YCA [CLOCK [ CHANNEL |
CABLE/DSS BOXYCRETV
VCA®CABLE/OSS BOXPTV
SELECT:a Y SET :»
EXtT___¡ACTION
Press A Y to select connection
and press » to set.
CHANNEL/CLOCK AUTO SET
screen appears.
CHANNEL/ CLOCK AUTO SET
CONNECT ANTENNA CABLE
8 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts @panasonic.com