Honeywell HX2 Quick Start Manual page 13

Hide thumbs Also See for HX2:

Setting up the HX2

Please have the following Information available before setting up your HX2:

Network ID (SSID) of the Access Point

WEP key or LEAP authentication credentials

Connect a fully charged battery to the HX2.

Press the Power button.

Accept the EULA.

Calibrate the touch screen.

Set the date and time.

Edit the radio parameters.

Edit the RFTerm Terminal Emulation parameters (optional).

Perform a reboot.

Rebooting the HX2

Using the Start menu, select Start > Run and type warmboot in the text box. Press

Enter.

When the HX2 is booting, there may be small delays while the wireless client connects,

applications launch, remote management completes and Bluetooth devices connect.

Bluetooth and HX2

Please refer to the HX2 Reference Guide for information when using the HX2 with

Bluetooth.

ActiveSync

Installing ActiveSync on Desktop/Laptop

ActiveSync (version 4.5 or higher for Windows XP desktop/laptop computers) must be

resident on the host (desktop/laptop) computer. Windows Mobile Device Center is

required for a Windows Vista/Windows 7 desktop/laptop computer. ActiveSync and

Windows Mobile Device Center for the PC are available from the Microsoft website.

Follow Microsoft's instructions to locate, download and install ActiveSync or Windows

Mobile Device Center on your desktop/laptop.

ActiveSync using USB-Client Connection

The only connection type is USB Client.

Table of Contents