T Scale X7-11 Technical Manual page 39

T-Touch Retail Application A1.09
Housing assembled by over tighten.
System hang Software error, need restart
Disconnect AC
adapter will turn off Battery low
power
Scale in sleep mode
LCD off but power
LED on
System hang
System hang
Can't turn on power
after update software Update software incorrect,
by USB
Used old core software.
- 37-
touch screen.
Loose housing screws, if overtighten.
Hold ON/OFF key for 6 seconds to
restart the scale.
Disconnect battery and charger,
connect again and turn on the power
Verify the batteries are rechargeable
types and charging voltage getting
proper. Plug AC adapter to charge
battery.
Replace battery
Press ON/OFF key to back to working
mode
Hold ON/OFF key for 6 seconds to
restart the scale.
Disconnect battery and charger,
connect again and turn on the power
Disconnect battery and charger,
connect again and turn on the power.
Use another USB flash driver to update
software.
Update core software.