T Scale X7-11 Technical Manual page 25

T-Touch Retail Application A1.09
Wait for to display stable indication and
Press NEXT key,
Display will be showCalibration Finished
If its show, FAIL, PleaseStart again
Please do the calibration again.
Next Cal Reminder
If want to remind next calibration date, click the
cal reminder box for to enable next cal date
option. It will remind when its reach due date
while initial start up.
Press End key to exit from the calibration mode.
5.2.5.2. Internal Counts
The AD internal counts will be displayed.If load cell
is connected and working correctly,
When you place goods on the pan, counts will be
increase accordingly.
Press << key at the top of the left corner for to go
back to last step , or press other options to go to
next step.
- 23-