T Scale X7-11 Technical Manual page 20

T-Touch Retail Application A1.09
5.2.3.2. Range Mode
Range mode. Can select signal range, dual
interval, dual range.
Press < key at the top of the left corner for to go
back to last step, or press other options to go to
next step
5.2.3.3. Decimal point
Select desired decimal digits from the list
Press << key at the top of the left corner for to
go back to last step, or press other options to
go to next step
5.2.3.4. Capacity Setting
Use the numeric keypad to input capacity
Note: If it's selected dual interval or dual
range, it's required to input capacity Max1
and Max 2
It is required to set max2 > max1.
Press < key at the top of the left corner for to
go back to last step, or press other options to
go to next step.
5.2.3.5. Division setting
Select the desired division from the list.
- 18-