AT&T MicroCell Quick Start Manual
At&t microcell access point router
Hide thumbs
Also See for MicroCell:
- User manual (28 pages) ,
- Operating and troubleshooting (23 pages) ,
- User manual (15 pages)
Related Manuals for AT&T MicroCell
Summary of Contents for AT&T MicroCell
- Page 1 Quick Start AT&T MicroCell ™...
-
Page 2: Getting To Know Your Device
Getting To Know Your Device Status Indicators Device Connections (Front of the Device) (Back of the Device) Network Ethernet Power Power Ethernet Package Contents AT&T MicroCell™ | AC power adapter | Yellow Ethernet cable | Quick Start | User Guide... -
Page 3: Before You Begin
– At least one foot from other wireless broadcasting devices to avoid possible interference. – Where you can connect your MicroCell to your Internet equipment. • Plan on 10-15 minutes for equipment setup and online activation. Your device will then need up to an additional 90 minutes for final device activation, which requires no effort on your part. -
Page 4: Power On Your Device
Quick Setup Connect your device to the Internet Connect the yellow Ethernet cable from the “Ethernet” port on your MicroCell to your router. Power on your device Connect your MicroCell to a power outlet with the AC power adapter. The Power light on the front of the device will come on immediately. Within a few minutes, other lights will flash as a GPS signal is located and software is updated. -
Page 5: Wait While Your Device Connects
NOTE : • You receive a text message and an email confirmation. You may need to restart your cell phone for • The Network light on your MicroCell is solid and GREEN. “AT&T MicroCell” or MicroCell” or M-Cell” instead • Your cell phone shows “AT&T... -
Page 6: Need More Help
Having Trouble? Make sure: 1. You have waited at least 90 minutes for activation to complete. 2. You have activated your MicroCell online and received the Online Activation Complete email. 3. Your MicroCell GPS indicator light is solid and not flashing.