Table of Contents
Advertisement
Preparation (Continued)
D: Audio output
15
Press
16
When you connected an audio system to the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack
( page 16):
Press
When you connected an HDMI device to the HDMI OUTPUT jack ( page 15, 16):
Press
22
Downloaded From Disc-Player.com Toshiba Manuals
/
to select "Audio", then press OK.
SETUP MENU
Picture
Digital Out SPDIF
Audio
Digital Out HDMI
Language
Ethernet
General
Dynamic Range Control
Dialog Enhancement
Speaker Setting
/
to select "Digital Out SPDIF", then press OK.
Select one of the followings according to your connection, and press OK.
Bitstream
When an AV receiver or processor equipped with built-in Dolby Digital, DTS or MPEG
decoder is connected to this player.
When you play a disc recorded in Dolby Digital Plus or Dolby TrueHD format, Dolby Digital sound is
Digital Out SPDIF
output. When you play a disc recorded in DTS-HD format, the sound is converted to a DTS bitstream.
If the AV receiver or processor does not support DTS, select "PCM".
Bitstream
PCM
PCM
When a 2ch digital stereo amplifi er is connected to this player.
When you play an HD DVD or DVD video disc recorded in Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD format, sound is converted into PCM (2ch) format.
/
to select "Digital Out HDMI", then press OK.
Select one of the followings according to your connection, and press OK.
Auto
When an HDMI device equipped with built-in Dolby Digital, DTS, MPEG or linear PCM
decoder is connected to this player.
When you play a disc recorded in Dolby Digital Plus, Dolby TrueHD or DTS-HD, PCM is output (core
Digital Out HDMI
only for DTS-HD).
When you play a disc recorded in Dolby Digital or DTS format, digital audio signal (bitstream audio)
Auto
is output. If a connected HDMI device does not support Dolby Digital, DTS or MPEG, sound is
PCM
converted into linear PCM to output.
Downmixed PCM
To output high bitrate audio, select "Auto", then make another setting. For details, see
PCM
When an HDMI device which has multi channel input is connected to this player.
When you play an HD DVD or DVD video disc recorded in multi channel in Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS or DTS-HD format, the sound is decoded and output in multi
channel in linear PCM format.
Downmixed PCM
When a 2ch digital stereo AV receiver or processor is connected to this player.
When you play a DVD video disc recorded in Dolby Digital, DTS, MPEG1 or MPEG2 format, sound is
converted into PCM (2ch) format to output.
Note
• Setting "Auto" or "PCM" will reduce output level of multi channel sound from the ANALOG AUDIO
OUTPUT jacks and the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack if you:
– view the playback picture on an HDMI TV connected to this player.
– play an HD DVD video disc of a certain type, recorded in linear PCM format.
In this case, the output level will be restored by setting to "Downmixed PCM".
Bitstream
Auto
Off
Auto
Off
5.1ch
page 34.
Advertisement
Chapters
Table of Contents
