Appliance Data; Installation Requirements - Flavel Inspire FWR**0R Series Installation And User Instruction Manual

Table of Contents

Advertisement

Appliance Data

Supply Voltage
Fuse Rating
Heating Element
Mains Cable
Illumination
The Flavel Electric Heater is manufactured by: -
CFM Europe Limited
Trentham Lakes
Stoke on Trent
Staffordshire ST4 4TJ

Installation Requirements

The Flavel Electric heater is supplied with a moulded three-pin plug (13
Amp) and approximately 1.8 metres of flexible mains cable (1mm 2 ). The
appliance and surround should therefore be located close to a suitable
mains socket to enable connection. The electrical socket MUST be easily
accessible to allow disconnection.
This heater MUST be earthed. If in any doubt consult a suitable competent
person.
Connections
L = Brown
N = Blue
Replacement fuses should be approved and conform to BS 1362.
The rating plate is located at the bottom of the product, alongside the on /
off switch. The model number and serial number of the product will be
required when booking a service visit.
230V ac, 50Hz
13 Amp
2 x 500W
1 x 1.8M PVC 1mm 2
2 x 20W Low Energy Bulb
E = Green / Yellow
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspire fwr**er series

Table of Contents