Advanced Picture Adjustments; Color Temperature; Black; Y/C - Sharp LC-62C42U Operation Manual

Basic adjustment settings

Advanced picture adjustments

This TV provides various advanced functions for
optimizing the picture quality.
Press MENU to display the MENU screen,
1
and then press c / d to select "Picture".
Press a / b to select "Advanced", and then
2
press ENTER.
Press a / b to select a specifi c adjustment
3
item, and then press ENTER.
• You can select "Color Temp.", "Black", "3D-Y/
C", "Monochrome", "Film Mode" or "Range of
OPC".
Press a / b (or c / d ) to select the desired
4
parameter.
• See the table for the selectable parameters.
Press MENU to exit.
5

Color Temperature

For a better white balance, use color temperature
correction.
Selected item
White with Bluish tone
High
Mid-High
Middle
Mid-Low
Low White with Reddish tone

Black

Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
Selected item
Off No adjustment
For high detail in black portions
On
26
Description
Description
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Selected item
Normal adjustment
Standard
Fast For moving images
For still images
Slow
NOTE
• 3D-Y/C is available for input signal from Composite Video
and ANALOG IN.

Monochrome

For viewing a video in monochrome.
Selected item
Off Normal color
For viewing in monochrome
On

Film Mode (3:2 pull-down)

Automatically detects a fi lm-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still fi lm frame for high-defi nition picture
quality.
Selected item
Normal viewing mode
Off
Detects, analyzes, converts fi lm
On
source

Range of OPC

The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of e 16 and a minimum of
f 16.
Selected item
f 15 through e 16
Max.
f 16 through e 15
Min.
NOTE
• The range of OPC settings are active only when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Description
Description
Description
Description