Port Forwarding - D-Link DSL-2750U User Manual

Highly integrated adsl2/2+ integrated access device

Hide thumbs Also See for DSL-2750U:

Table of Contents

DSL-2750U User Manual

You can only use WPA-enterprise if you have set up RADIUS server. This is the

WPA/WPA2 authentication with R

ADIUS server instead of pre-shared key.

4.3.2

Port Forwarding

This function is used to open ports in your device and re-direct data through

those ports to a single PC on your network (WAN-to-LAN traffic). It allows remote

users to access services on your LAN, such as FTP for file transfers or SMTP

and POP3 for e-mail. The device accepts remote requests for these services at

your global IP address. It uses the specified TCP or UDP protocol and port

number, and redirects these requests to the server on your LAN with the LAN IP

address you specify. Note that the specified private IP

address must be within the

available range of the subnet where the device is in.

Choose A

DVANCED > Port Forwarding. The page shown in the following figure

appears.

Table of Contents

Show Quick Links

Table of Contents