General Power Tool Safety Warnings; Save All Warnings And Instructions For Future Reference - Makita HR5201C Instruction Manual

Uncertainty (K) : 2.5 m/s
Work mode : chiseling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 2 m/s
For Model HR5211C
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : chiseling function with side handle
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : chiseling function with side grip
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : hammer drilling into concrete
Vibration emission (a
Uncertainty (K) : 2 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
2
2
) : 9.5 m/s
h,CHeq
2
2
) : 17 m/s
h,HD
2
) : 100 dB(A)
pA
) : 111 dB(A)
WA
value (tri-axial vector
2
) : 11 m/s
h,CHeq
2
2
) : 8 m/s
h,CHeq
2
2
) : 12.5 m/s
h,HD
2
For European countries only
ENG306-1
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
ENG303-2
machine(s):
Designation of Machine:
Rotary Hammer
Model No./ Type: HR5201C,HR5210C,HR5211C
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
ENG102-3
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd,
Michigan, Drive, Tongwell,
ENG216-2
Milton Keynes, MK15 8JD, England
sum)
000230
ENG306-1
ENG303-2
ENG901-1
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3
Corporation as the
30th January 2009
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, JAPAN
ENH101-13
responsible
GEA005-3