Setting Up Key Press Echo; Alert Notification - Sanyo S1 User Manual

Setting Up Key Press Echo

With this feature, you can hear a voice say the numbers when
you press the keypad. This feature is available when you are in
standby mode.
1. Select
2. Select On or Off.
Note:
If the Key Beep is off, you are not able to change this setting. See
"Adjusting the Application, Start-up/Power-off, or Key Beep Volume" on
page 27.

Alert Notification

Your phone comes with several different options to keep you
aware of what's going on by sounding the alert or ringer.
To set the alerts:
1. Select
2. Select an option and press
Service to set alert on or off for network services
parameter changes.
10-4 to set an alert to notify you of 10-4 calls.
10-4 Calls to notify of incoming 10-4 calls.
10-4 Missed to notify of missed 10-4 calls.
Headset Alert to tell if you have the floor using a
headset.
Floor Tone Vol. to set the floor tone volume during a call.
Voicemail to set an alert to notify you of voice message(s).
Select Ringer Length to set the ringer length of Voicemail
notification.
Messaging to set an alert to notify you of text, picture
message or Web Alert. Select Ringer Length to set the
ringer length of Messaging notification.
Minute Beep to set a minute reminder that beeps ten
seconds before the end of each minute during a call.
Signal Fade to set alert to notify you when your phone
loses a signal during a call.
> Settings > Sounds > Others > Key Press Echo.
> Settings > Sounds > Alerts.
.
29