Making A 10-4 Call (1-To-1 Call) - Sanyo S1 User Manual

Making a 10-4 Call (1-to-1 Call)

You can place a 1-to-1 10-4 call by selecting a Contacts entry
from the 10-4 List.
1. Press
2. Press
want to place a call (Company List, Personal List, 10-4 Outgoing,
10-4 Incoming, or 10-4 Missed) and press
Tip:
You can also select
number directly. See page 85 for details.
3. Highlight the Contacts entry you want to call, and press and
hold
10-4 calling... and Connecting... followed by "You have floor." You
can now begin speaking.)
– or –
Highlight the Contacts entry you want to call and press and
release
described above, but "Floor is open." will appear on the screen
and either you or other party may press and hold
the floor and speak.)
Note:
During a 10-4 call, the "floor" is the right to speak. When you see
Floor is open.
"
the key). Only the person who has the floor can speak. The phone beeps if
you press
4. Continue holding
speaking, release
(When the other party takes the floor, you will see the
speaker's name and phone number and the text "has floor.")
5. When you are finished, press
Note:
When neither party has the floor during a 10-4 call, "
appears on the display. If no one takes the floor for 20 seconds, the 10-4
call ends automatically.
Tip:
If you press
standard voice call.
84
(left softkey) or
10-4
(left softkey), and select the list from which you
Go to
Enter 10-4#
to place the call and get the floor. (You will see
to place the call. (The call will connect as
", the first person to press
when the other party has the floor.
or
to access the 10-4 List.
Go to
from
as you speak. When you finish
to allow the other party to speak.
.
during step 3 above, you can make a
.
option to enter a 10-4
can speak (while holding
Floor is open.
to take
"