Start Up - Ac Operation (Figure 5-5); Start Up - Dc Operation (3-Way Models Only) (Figure 5-5); Shut Down (Figure 5-5); Additional Information On Controls - Jayco Eagle Owner's Manual

START UP – AC OPERATION (Figure 5-5)
• Verify that 120-volts AC is available to the refrigerator and that the AC fuse (D) in the
control bracket is operational.
• Set the Energy Selector Switch (A) to the AC position and verify that the Gas COntrol
Selector (E) is in the OFF position.
• No other action is required since a fixed thermostat is provided to prevent food from
freezing in the electric modes.
START UP – DC OPERATION (3-WAY MODELS ONLY) (Figure 5-5)
• Verify that 12-volts DC is available to the refrigerator and that the DC fuse (C) in the
control bracket is operational.
• Set the Energy Selector Switch (A) to the DC position and verify that the Gas Control
Selector (E) is in the OFF position.
• No other action is required since a fixed thermostat is provided to prevent food from
freezing in the electric modes.

SHUT DOWN (Figure 5-5)

• Set the Gas Control (E) to the OFF position.
• Set the Energy Selector Switch (A) to Gas position.
NOTE: The Gas Control and Energy Selector must be switched to the above positions
to completely shut down the refrigerator.

ADDITIONAL INFORMATION ON CONTROLS

Be attentive when the unit's outer surface is being washed down, particularly when using
power sprays, to avoid wetting electrical controls.
CAUTION: Never allow water to be sprayed on electrical controls located behind
the inlet vent door. Electrical damage or fires could result.
Figure 5-5
60

BBQ GRILL (Option)

WARNING: The maximum weight limit for the bracket on the side of your
folding camping trailer is 50 lbs. This limit includes the weight placed on the
carryout stove and the BBQ grill. Exceeding this weight could cause damage
to the unit and possibly cause personal injury from hot equipment.
An option for your folding camping trailer is a BBQ Grill. This grill is for use outside of
the folding camping trailer and comes with a bracket to attach to the side of the unit. The
following list will supply basic operations for the grill. Be sure to read all instructions
included with the grill.
1. Install the grill bracket on the side of the folding camping trailer mounting bracket.
Make sure that it is securely in place.
2. Place the BBQ grill into the bracket. (Fig. 5-6)
Fig. 5-6
3. Attach the fuel hose to the grill and the LP gas connection located under the folding
camping trailer by using the "Quick-Coupler" instruction as follows (Fig. 5-7):
• Place the handle in the "OFF" position and push back the sleeve. Valve handle
must be in the "OFF" position to make the connection. (Fig. 5-8)
• Insert the plug and release the sleeve. (Fig. 5-8)
Fig. 5-8
• Push plug until the sleeve snaps forward, locking the plug into the socket.
(Fig. 5-9)
• Turn handle to "ON" position to turn gas on. (Fig. 5-10)
4. Open the lid to the BBQ Grill.
Fig. 5-7
Fig. 5-10
Fig. 5-9
61