Advertisement
Connect the Mixer
Use shielded audio cables (not supplied) for all input
connections. Signals from connected input sources are
routed to the corresponding channels on the mixer.
Two stereo inputs
Connect the line level outputs from one device to the
mixer's AUX 1 INPUT R and L jacks. Connect the line
level outputs from the second device to the mixer's AUX
2 INPUT R and L jacks.
Four stereo sources as monaural inputs
Use shielded Y-adapters (not supplied) at each source's
left and right outputs, and connect a separate stereo
source to each input jack (AUX 1 R, AUX 1 L, AUX 2 R,
or AUX 2 L) on the mixer.
Four monaural inputs
Connect each monaural device to each input jack (AUX 1
R, AUX 1 L, AUX 2 R, or AUX 2 L) on the mixer.
Two monaural sources as stereo inputs
Use shielded Y-adapters (not supplied) at each source's
monaural outputs, and connect one source to AUX 1 R
and L. Connect the other source to AUX 2 R and L.
Four microphones
Connect up to four microphones to the mixer's MIC
jacks (1–4). Each microphone signal is routed to the
corresponding channel on the mixer.
If you connect a microphone to a corresponding audio
source, and they are output to the same channel, the
signals from both devices are mixed and controlled by
the mixer.
5
Advertisement
