Table 5 shows the International and PC Line Character sets from 32 through 255.
3.7.4
Printer Graphic Commands
Command String
ESC - 'a' – n
ESC - 'J' – n
ESC - 'P' - '#'
ESC - 'P' - '$'
ESC - 'V' - n1 – n2
ESC - 'v' - n1 – n2
3.7.5
Magnetic Card Reader Control Commands (When MCR is installed)
Command String
ESC -
'M' - 'nnm' – Cr
ESC – 'C'
Table 5: International and PC Line Draw Character Set
Printer Action
Select dot line spacing between printed lines.
Graphic Line Feed command
Select Online mode, characters printed as received.
Select Buffer mode, characters are printed on (^ D)
8-bit Graphic command
RLE Compressed Graphic command
Printer Action
Select MCR with (nn) auto timeout Where nn="00" to "99"
m=1: Reads track 1 only
m=2: Reads track 2 only
m=3: Reads track 3 only
m=4: Reads track 1 & 2
m=5: Reads track 2 & 3
m=6: Reads track 1, 2 & 3
Cancel MCR read process
16