Yamaha TF5 User Manual page 55

0
ASSIGN box
Displays the ASSIGN screen.
A
Channel output level slider
Adjusts the fader level for the selected channel.
B
Channel output level meter
Displays the output level for the selected channel.
FX1L–FX2R
1
Channel name
Click to display the CH NAME screen
Click to display information for a different channel.
2
Recall Safe button
Turns Recall Safe on and off for the corresponding channel.
You can display the RECALL SAFE screen by clicking the jump button in the right corner of the Recall Safe button.
3
Mute Safe button
Click to temporarily exclude the selected channel from the effects mute group. If you mute the effects mute group, any
channels in that group that have mute safe enabled will not be muted.
4
HA/EQ/GATE/COMP boxes
Click to display the configuration screen for the corresponding feature.
You can click the EQ button displayed here to turn EQ on and off.
FX1 box: Displays the FX1 screen
EQ box: Displays the EQ screen
5
Channel on/off button
Turns the selected channel on and off.
6
6Channel pan slider
Adjusts the pan for the selected channel.
7
SEND TO AUX box
Click when selected to display the SEND TO AUX screen.
Displays the amount of signal from the selected channel that is sent to each AUX bus.
Send level, the selected channel's fader level, and the actual send level grouped with the DCA is displayed in the horizontal
bar.
The information displayed here indicates whether the signal sent to the AUX bus is the pre-fader or post-fader signal. Pre-
fader signal is displayed in green; post-fader signal is displayed in gray.
8
ASSIGN box
Displays the ASSIGN screen.
(page 50)
(page 62).
(page 43).
(page 36).
(page 50)
- 55 -
Main display area
User Guide
TF Editor