Effect Parameters - Yamaha TF5 User Manual

Effect parameters

REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE
One-input, two-output hall, room, stage, and plate reverbs.
Cannot be used for INS FX 3–6.
Parameter
Reverb Time 0.3s–20.0s
Initial Delay 1.0ms–500.0ms
High Ratio 0.1–1.0
Diffusion 0–10
Density 0% – 100%
HPF Thru, 21.2Hz–8.00kHz
LPF 50.0Hz–16.0kHz, Thru
MONO DELAY
One-input, two-output basic repeating-type delay.
Parameter
Delay 1.0ms–2700.0ms
Feedback Gain -99 – +99
High Ratio 0.1–1.0
HPF Thru, 21.2Hz–8.00kHz
LPF 50.0Hz–16.0kHz, Thru
Sync Off, On
Note ----,
STEREO DELAY
Two-input, two-output basic stereo delay.
Parameter
Delay L 1.0ms–1350.0ms
Delay R 1.0ms–1350.0ms
Feedback Gain L -99 – +99
Feedback Gain R -99 – +99
High Ratio 0.1–1.0
HPF Thru, 21.2Hz–8.00kHz
LPF 50.0Hz–16.0kHz, Thru
Sync Off, On
Note L ----,
Note R ----,
DELAY LCR
One-input, two-output 3-tap delay.
Parameter
Delay L 1.0ms–2700.0ms
Delay C 1.0ms–2700.0ms
Delay R 1.0ms–2700.0ms
Delay FB 1.0ms–2700.0ms
Feedback Gain -99 – +99
High Ratio 0.1 – 1.0
HPF Thru, 21.2Hz–8.00kHz
LPF 50.0Hz–16.0kHz, Thru
Level L -100 – +100
Level C -100 – +100
Level R -100 – +100
Sync Off, On
Note L ----,
Note C ----,
Note R ----,
Note FB ----,
Range
Determines the length of the reverberation.
Determines the amount of time that passes before the initial reverberation is heard.
Ratio of high frequency reverberations to the Reverb Time.
Left and right spread of the reverberation.
Density of the reverberation.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Range
Delay time.
Amount of feedback.
Amount of high-frequency feedback.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Delay time tempo sync.
– Value used to calculate the delay time based on the tempo.
Range
Left channel delay time.
Right channel delay time.
Left channel feedback gain.
Right channel feedback gain.
Amount of high-frequency feedback.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Delay time tempo sync.
– Value used to calculate the left channel delay time based on the tempo.
– Value used to calculate the right channel delay time based on the tempo.
Range
Left channel delay time.
Center channel delay time.
Right channel delay time.
Feedback delay time.
Amount of feedback.
Amount of high-frequency feedback.
High-pass filter cutoff frequency.
Low-pass filter cutoff frequency.
Left channel level.
Center channel level.
Right channel level.
Delay time tempo sync.
– Value used to calculate the left channel delay time based on the tempo.
– Value used to calculate the center channel delay time based on the tempo.
– Value used to calculate the right channel delay time based on the tempo.
– Value used to calculate the delay feedback time based on the tempo.
- 45 -
Main display area
Description
Description
Description
Description
TF Editor
User Guide