Using The Battery Pack; Installing The Battery; Removing The Battery; Battery Charge Level - LG RD2030 User Manual

Cellular phone
Table of Contents

Advertisement

Charge the battery fully before the initial use of the
phone.
The phone comes with a rechargeable battery. Keep the
battery charged while not in use in order to maximize
talk and standby time when using the phone.
To install the battery, insert the bottom of the battery into
the opening on the back of the phone. Then, push the
battery down until the latch clicks.
Turn the power off. (If power is on, a loss of stored num-
bers and messages may occur.)
Push the latch upwards in the direction of the arrow and
pull the battery out by holding its upper edges.
release
latch
14
LG-RD2030
slot
The battery charge level is shown at the top right of the
LCD screen.
When the battery charge level becomes low, the low
battery sensor will alert you in three ways: sounding an
audible tone, blinking the battery icon outline, and dis-
playing LOW BATTERY WARNING! If the battery
charge level becomes exceedingly low, the phone will
automatically switch off and any function in progress will
not be saved.
The desktop holder has a slot to accommodate a
battery. The slot accommodates a phone with a battery
pack for charging.
Warning! Use only the desktop charger provided with
the phone. Using the wrong charger may cause damage
to your phone and battery and invalidate the warranty.
1) Plug the charger into a wall outlet.
G
The charger should operate on a 110 ~ 240 VAC
source. (Check voltage of the charger).
2) Place the phone with the battery of the charger or just
with the battery.
3) The red light of the charger indicates that the battery
is being charged. If charging is completed, the light
will turn into green.
LG-RD2030
15

Advertisement

Table of Contents
loading

Table of Contents