Installation; Installing A Battery Pack; For Adapter Use; For Mobile Mount - LG VX5400 Service Manual

Tri band, quad mode [pcs/gps/cellular/amps] cdma mobile phone
Hide thumbs Also See for VX5400:
Table of Contents

Advertisement

2. Installation

2.1 Installing a Battery Pack

1) The Battery pack is keyed so it can only fit one way. Align the groove in the battery pack with the rail on the
back of the phone until the battery pack rests flush with the back of the phone.
2) Slide the battery pack forward until you hear a "click", which locks the battery in place.

2.2 For Adapter Use

1) Plug the adapter into a wall outlet. The adapter can be operated from a 110V source. When AC power is
connected to the adapter.
2) Insert the adapter jack into the phone with the installed battery pack.
Red light indicates battery is being charged.. Green light indicates battry is fully charged.

2.3 For Mobile Mount

2.3.1 Installation Position
In order to reduce echo sound when using the Hands-Free Kit, make sure that the speaker and microphone are
not facing each other and keep microphone a generous distance from the speaker.
2.3.2 Cradle Installation
Choose an appropriate flat surface where the unit will not interface with driver's movement or passenger's
comfort. The driver/user should be able to access the phone with ease. Using the four self-tapping screws
provided, mount the supplied braket on the selected area. Then with the four machine screws provided, mount
the counterpart on the reverse side of the reverse side of the cradle. Secure the two brackets firmly together by
using the two bracket joint screws provide. The distance between the cradle and the interface box must not
exceed the length of the main cable.
2.3.3 Interface Box
Choose an appropriate flat surface ( somewhere under the dash on the passenger side is preferred ) and mount
the IB bracket with the four self-tapping screws provided. Clip the IB into the IB bracket.
2.3.4. Microphone Installation
Install the microphone either by clipping I onto the sunvisor (driver's side) or by attaching it to door post
(driver's side), using a velcno adhesive tape (not included).
Copyright@2007 LG Electronics. Inc. All right reserved.
Only for training and serving purposes
- 13 -
LGE Internal Use Only

Advertisement

Table of Contents
loading

Table of Contents