Table of Contents
Advertisement
1) Press Soft Key 1 Menu.
2) Press
two times.
3) Press Soft Key 1 Select.
4) Press
Key Volume.
5) Adjust the key volume with
6) Then press Soft Key 1 Ok to save the key volume.
1) Press Soft Key 1 Menu.
2) Press
two times.
3) Press Soft Key 1 Select.
4) Press
Speaker Volume.
5) Adjust the speaker volume with
6) Then press Soft Key 1 Ok to save the speaker volume.
Use Vibrate Mode in a public place.
1) In standby mode, activate Vibrate Mode quickly by
pressing the
. (for 2 seconds) instead of using the
Menu function.
•
When Vibrate Mode is set, -Vibrate Mode Activated!-
is displayed on the LCD screen.
•
When Vibrate Mode is set, Key tone does not sound
and Vibration is selected as the ringer.
Note
To cancel Vibrate Mode, press
Normal Mode Entered! is displayed.
20
LG-RD2030
.
.
again until
Used to prevent other persons from using your phone
without your permission.
There are two types to enable the Lock Function with
one key and by using the Menu
1) In standby mode, to activate the lock mode quickly,
press the
(for 2 seconds).
Note
To cancel the Lock Mode, Press Soft Key 1
Unlock, then enter your password (4 digits).
The Lock Code / Password has been set to 0000 by
default.
This function allows you to carry the phone safely with-
out accidentally dialing a number.
When this function is enabled, no call can be made and
the access to the Menu will be locked. While the keypad
is locked, it is possible to answer a call normally.
To enable the function :
1) Press the key
for two seconds.
To disable the function :
1) Repeat the procedure.
LG-RD2030
(see page 60).
21
Advertisement
Table of Contents
