Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can identify
the caller by the ringer type. (See "Ringer Types" on page 31.)
To select a ringer type for an entry:
1.
Display a Contacts entry.
2.
Scroll to <Edit Entry> and press
3.
Highlight the current ring type and press
4.
Press the navigation key to the right and highlight the desired
Ringer Category.
5.
Press the navigation key down. (When you highlight a ringer
type, a sample ringer will sound.)
6.
Highlight your desired ringer and press
7.
Press Done (left softkey) to save the new ringer type.
Section 2G: Using Your Contacts
OK
.
OK
.
OK
.
72