Adding A New Device (Pairing) - LG PM-325 Owner's Manual

Adding a New Device (Pairing)

Pairing:
Pairing is the registration process that permits the handset to locate
and establish a 1-to-1 connection with the target device. Devices that
are not paired cannot be connected. To "Pair" the PM-325, enable
the pairing mode of the target device (consult the user guide of the
target device for directions). Make sure that Bluetooth
the handset and begin "Searching" When the handset locates the
Bluetooth-enabled target device as a result of "Searching" you must
register the PIN code of the device in the handset. W hen the
registration and "Pairing"" are complete, your phone and device can
be connected immediately.
Searching and Pairing:
1. Press Menu (left softkey ) to access the main menu.
2. Select Bluetooth (
3. Scroll to Add New and press
4. Select Searching & pairing and press
Note: The PM-325 will display all devices found within 30 seconds. If OK is
pressed within the 30 second duration, the phone will stop searching
and display only those devices found up to that time.
5.
Among Bluetooth
and press
6.
Enter PIN code and press
Section 3D: Using Bluetooth
).
7
TM devices, select the desired device to register
OK .
OK .
OK
.
OK .
TM is enabled in
151