Using Your Phone's Battery And Charger - LG PM-325 Owner's Manual

Using Your Phone's Battery and Charger

Battery Capacity
Your Sprint PCS Vision Phone is equipped with a Lithium Ion (LiIon)
battery. It allows you to recharge your battery before it is fully
drained. The battery provides up to 3.2 hours of continuous digital
talk time.
When the battery reaches 5% of its capacity, the battery icon blinks.
When there are up to two minutes of talk time left, the phone sounds
an audible alert and then powers down.
Note: Long backlight settings, searching for service, vibrate mode, and
browser use affect the battery's talk and standby times.
Tip: Be sure to watch your phone's battery level indicator and charge the
battery before it runs out of power.
Installing the Battery
To install the battery, replace the battery, or to access your phone's
ESN (electronic serial number), you must first remove the phone
back cover.
Note: Before removing the cover, always switch off the power and disconnect
the charger and any other device. Avoid touching electronic
components while changing the covers. Always store and use the
device with the covers attached.
To remove the back cover, turn the phone upside down, press the
release button down, and push the back cover away.
Section 2A: Your Sprint PCS Vision Phone – The Basics 16