Oki okipos User Manual page 149

Pin No.
Signal name Direction
25 Pin 9 Pin
21~24 N/C
25 INIT
13
25
5
1. During the period from when the
power is turned on (including reset-
ting using the interface) to when the
printer is ready to receive data.
2. During the self printing.
3. When the cover is open.
4. When the printer stops printing due to
a paper-end.
5. During macro executing standby
status.
6. When an error has occurred.
7. When the receive buffer becomes
full.
2) X-On/X-Off Communication Mode
Always space, except during following conditions:
• Period between reset and communication enabled
• During self printing
Not used
IN Status of this signal is not checked.
1
6
9
– 137 –
Function
Printer status
1
D-sub 25 Pin
14
D-sub 9 Pin
DIP SW 1-6
OFF ON
BUSY BUSY
BUSY BUSY
- BUSY
- BUSY
-
BUSY
-
BUSY
BUSY BUSY