TV system
— Select the analogue video signal system
●
that is compatible with your TV.
Flicker filter
— To improve image quality on the
●
screen of your TV, select On. The flicker filter may not
diminish image flicker on all TV screens.
Slide handling settings
Select
Menu
Tools
>
handling.
Select from the following:
Opening the slide
●
incoming call when you open the slide.
Closing the slide
— Set the device to end an active
●
call when you close the slide.
Keyguard activation
●
keypad when you close the slide.
Sensor settings and display rotation
When you activate the sensors in your device, you can
control certain functions by turning the device.
Select
Menu
Tools
> Settingsand
>
settings.
Select from the following:
Sensors
— Activate the sensors.
●
152
Settings
and
General
>
— Set the device to answer an
— Set the device to lock the
General
Turning control
●
Snoozing alarms
turning your device so that the display faces down.
Security settings
Phone and SIM
Select
Menu
Slide
>
Security
>
PIN code request
●
requested each time the device is switched on.
Deactivating the PIN code request may not be allowed
by some SIM cards.
PIN
code,
●
change the PIN code, PIN2 code, and lock code. These
codes can only include the numbers from 0 to 9.
If you forget the PIN or the PIN2 code, contact your
service provider. If you forget the lock code, contact a
Nokia Care point or your service provider.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialling of the
emergency number.
Sensor
>
Keypad autolock period
●
keypad is locked when your device has been idle for a
certain period of time.
Phone autolock period
●
use, you can set a time-out after which the device
— Select
Silencing calls
to mute calls and snooze alarms by
Tools
Settings
>
>
Phone and SIM card
and from the following:
— When active, the code is
PIN2
code, and
Lock code
— Select whether the
— To avoid unauthorised
© 2009 Nokia. All rights reserved.
and
and
General
>
— You can