Advertisement
HOW TO ADJUST THE RESISTANCE LEVEL
The Mag unit provides 7 different levels of resistance power. It can be controlled via a manual lever
(RDA2429-D) or a remote shifter (RDA2429-R). L is the lowest and H is the highest power.
It's also possible to adjust the resistance power by shifting the bike gear. However, if you use the inner
front gear to reduce the power, it will increase the pedaling torque too much then it will make the pedaling
feel very jerky.
So we recommend you to adjust the power on the Mag unit for smoother and more realistic training.
!
On RDA2429-D, make sure the mag unit has stopped completely.
Do no touch any moving parts such as wheel or belt.
!
The mag unit always has some resistance, even when setting at the lowest range.
Some slippage is normal when the resistance level on the trainer is set too high.
!
Use just lighter level in the first 5 minutes for warming up your muscles and knee
to avoid accident.
You also should cool-down after session with lighter resistance.
RDA2429-D (Non-Remote)
How To Increase Power
To increase the power, slide the lever towarwd H symbol. (see Fig. H)
How To Reduce Power
To reduce the power, slide the lever toward L symbol. (see Fig. I)
RDA2429-R (Remote)
How To Increase Power
To increase the power, turn the lever toward H symbol (clockwise). (see Fig. J)
How To Reduce Power
To reduce the power, turn the lever toward L symbol (counter-clockwise).
(see Fig. J)
(Fig. H)
(Fig. I)
Reduce Power
Indicator
(Fig. J)
Increase Power
Advertisement
