BT Quartet 1000 User Manual page 4

Quartet 1000 – Edition 3 – 5/9/00 approved
In Use/Battery
Low light
Indicates when the
handset rings, is in
use or, if the
handset is on
standby, to indicate
the battery
needs recharging.
M1/M2 buttons
Allows you to store
and dial one touch
numbers.
Talk button
Press to make or
receive a call.
Quickdial button
Allows you to store
and dial up to 10
numbers in the
memory.
Redial button
Redials the last
number called, or
press to enter a
pause in a stored
number.
Secrecy
Press to mute the
call so your caller
cannot hear you.
If you experience any problems then please call
the Quartet Helpline on 0845 769 7146
Setting up
Follow these steps to get your Quartet 1000
additional handset ready for use.
Like all cordless phones, your Quartet 1000
additional handset will need charging for 24
hours before use.
1 Plug the power cable into the charging unit
Plug the power cable into the socket located on
the bottom of the charging unit, then feed the
cable through the channel.
M1 M2
1 2 3
4
5 6
7 8 9
0
R
Redial
1471
Secrecy
Charging contacts
1
Aerial
Can be extended.
Volume control
buttons
Adjusts the handset
ringer and earpiece
speech volume.
Channel button
Selects an
alternative radio
frequency if
interference occurs
during a call.
Keypad
Recall button
For use with a
switchboard/PBX
and BT Select
Services.
1471 button
Lets you hear the
telephone number
of the last person
who called.