Table of Contents
Advertisement
100
Drivin g and operatio n
Manoeuvri ng the vehicle
To manoeuv re the vehicle back and forth
during attem pts to park or in garage
entrances the creeping movement can be
utilised by releasing the foot brake.
Never actuate a ccelerator and brake
pedals simultaneously.
To prevent dam age, Ea sytronic
disengages the "creep function" at
extremely high automatic c lutch
tem peratures.
Ofrecido por www.electromanuales.com
Vehicle storag e
Ap ply the ha nd brake and rem ov e the key
from the ignition. The previously selected
gear (shown on the transm ission display )
remains selec ted. No gear is selected in
selector lever p osition N.
When the ignition is switched off,
Easytronic no longer responds to
movem ent of the selector lev er.
If the ignition key is not removed, the
battery m ay be discharged if the vehicle is
then left to stand for a lengthy period of
tim e.
If the handbrak e has not been ap plied, the
control indicator R flashes for a few
second s a fter the ignition is switched off.
Fault
To prevent d amage to the Easytronic
transmission, the clutch is closed
automatically at high c lutch temp eratures.
C ontrol indicator A illuminates in the
event of a fault. Continued driving is
possible. Manual mode ca nnot be used for
shifting.
If a n "F" is also shown in the transmission
display, it is not possible to continue
driving.
Hav e c ause of fault remedied by a
workshop. The system 's integrated self
diag nostics allow faults to be quickly
remedied.
Advertisement
Chapters
Table of Contents
