Configuring - Radio Shack PRO-652 User Manual

To activate SAME standby mode:
1. Press WX. The scanner quickly locates an active
weather radio frequency.
2. When the scanner stops on a frequency, press
the stby softkey. The softkey will change
to STBY, and the scanner will alert when a
matching SAME message is received.
3. To exit SAME Standby Mode, press the STBY
softkey again, or press MAN, SCAN or PROG.
Your scanner will resume SAME Standby operation
90 seconds after the SAME warning starts. You may
reset standby mode by pressing the STBY softkey
twice at any time.
46

Configuring

Your PRO-652 scanner includes Global Settings that
store radio-wide settings.
Caution: The Special Global Settings menu (PROG
+ GLOB) includes parameter settings that, if not set
properly, may adversely affect the performance of
your radio. We recommend caution when changing
these settings.
NOTE: Each parameter includes a Dflt softkey that
restores the factory default setting.
Context sensitive help is available for all parameters.
Press FUNC and then SEL to view help. Press SEL
again to exit help.
GLOB Menu Reference
Contrast – Sets LCD contrast.
Owner – Sets Welcome Message text display.
Clone Send – Press SEL to send data to clone.
Alert Mode – Tone, Light, Both, or Off.
Sound Mode – On or Stlth (Silent).
Key Beeps – On or Off.
Light Mode – Norml, Delete Key, Ignre, On, or Stlth.
Light Level – Dim, Brit, or Off.
Dim LED – Yes or No.
Atten Mode – Attenuator reduces interference
from nearby transmitters. Global applies
attenuation to all objects. Normal uses object
attenuator settings.
Global Atten – On or off.
Clear Hits – Press SEL to clear all hit counters.
Hit Counts – Toggles the hit counter feature.
Dflt ScanList – Sets the default scan list for new
objects (0-22).
47