Brother MFC-9440CN User Manual page 62

Chapter 7
Turning on the remote codes
You need to turn the Remote Codes setting to
on to use the Fax Receive Code and
Telephone Answer Code.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 4.
Setup Receive
4.Remote Codes
c
Press a or b to choose On.
Press OK.
d
If you don't want to change the Fax
Receive Code, press OK.
e
If you don't want to change the
Telephone Answer Code, press OK.
f
Press Stop/Exit.
Changing the remote codes
The preset fax receive code is l51 (l91 for
New Zealand). The preset telephone answer
code is #51 (#91 for New Zealand). If you are
always disconnected when accessing your
external TAD, try changing the three-digit
remote codes, for example ### and 555.
a
Make sure you are in Fax mode
b
Press Menu, 2, 1, 4.
Setup Receive
4.Remote Codes
c
Press a or b to choose On or Off.
Press OK.
d
If you chose On in c, enter the new Fax
Receive Code.
Press OK.
e
Enter the new Telephone Answer Code.
Press OK.
f
Press Stop/Exit.
52
7
.
7
.