Removing The Cover - IBM 6290 Hardware Maintenance Manual

Removing the cover

Important:
See "Safety information" on page 89 and "Handling electrostatic discharge-sensitive
devices" on page 92 before you begin.
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
4. Remove the floor stand, if attached.
5. Remove the screw that secures the cover at the rear of the system unit.
6. Carefully slide the cover forward and lift it up to remove.
20
Hardware Maintenance Manual
from the drives, and turn off all attached devices and the computer.
input/output (I/O) cables, and any other cables that are connected to the
computer.