Armrest Angle Adjustment - Pride Mobility JET 3 Ultra Owner's Manual

V . C O M F O R T
To change the armrest width:
1. Locate the two armrest knobs on each side of the
armrest receiver bracket. See figure 15.
2. Loosen the knobs.
3. Slide the armrests in or out to the desired width.
4. Tighten the knobs.
Armrest Height
To change the armrest height:
1. Loosen the setscrew on the armrest. See figure 15.
2. Raise or lower the armrest to the desired height.
3. Tighten the setscrew to secure the armrest.

Armrest Angle Adjustment

To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to
the floor. See figure 16.
2. Loosen the locking nut.
3. Turn the adjusting screw clockwise to lower the front
of the armrest, or turn the adjusting screw anticlock-
wise to raise the front of the armrest.
4. Tighten the locking nut to lock the adjusting screw into place.
Foot Platform Height
The foot platform height is easily adjusted to different heights in
1.75cm increments.
To raise or lower the foot platform:
1. Remove the retaining pins from the foot platform bracket.
See figure 17.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the retaining pins into the foot platform bracket
and tighten.
Foot Platform Depth
To adjust the foot platform depth:
1. Remove the retaining pins from the foot platform bracket.
See figure 17.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the retaining pins into the foot platform bracket
and tighten.
Foot Platform Angle
You can adjust the angle of the foot platform with a hex key.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the setscrew. See
figure 18
2. Turn the setscrew anticlockwise to raise the front of
the foot platform.
Jet 3 Ultra
A D J U S T M E N T S
ARMREST KNOB
Figure 15. Seatback Angle Adjustment
ARMREST ANGLE
ADJUSTING SCREW
Figure 16. Armrest Angle Adjustment
FOOT PLATFORM BRACKET
Figure 17. Foot Platform Adjustment
www.pridemobility.com
SEATBACK RELEASE LEVER
SETSCREW
LOCKING NUT
FOOT PLATFORM RETAINING PIN
23