Audio Systems - Cadillac 2005 LeSabre Getting To Know Manual

Getting to Know Your LeSabre
4

Audio Systems

AM-FM Stereo with Cassette Tape
Player, and CD Player with Automatic
Tone Control (if equipped)
Radio Controls
PWR: Press this knob to turn the radio
on or off. Turn the knob to the left to
decrease volume. Turn it to the right to
increase volume.
BAND: Press this button to select AM,
FM1 or FM2, or XM Radio.
TUNE: Turn this knob to choose radio
stations.
SEEK: Press the left or right arrow to go
to the next higher or lower station. Press
a SEEK arrow for two seconds; SCAN
will appear in the display. Use SCAN to
listen to stations for a few seconds.
Press and hold one of the SEEK arrows
for more than four seconds to listen to
each of your preset stations for a few
seconds. Press an arrow again to stop
scanning.
EQ: Press this button to choose bass
and treble equalization settings for
different program types.
AUDIO: Push and release this button
until BASS, MID or TREBLE appears on
the display. Then turn the Audio knob to
increase or decrease.
Also, use this button to adjust the bal-
ance and fade between the speakers.
Radio Data System (RDS) Features
TRAF: Press this button to receive traf-
fic announcements. TRAF will appear on
the display and when a traffic announce-
ment comes on, you will hear it.
INFO: If the current station has a
message, press this button to view the
message.
P-TYP: Press this button to find the
desired program type. Then, find a cate-
gory by turning the AUDIO knob. Press
either SEEK arrow to select a category
and take you to the category's first
station.
ALERT!: Alert warns of local or national
emergencies. You will hear the
announcement, even if the volume is
muted or a cassette tape or compact
disc is playing. You will not be able to
turn off Alert announcements.
Numbered Buttons
The six numbered buttons let you set up
to six AM and 12 FM stations (six FM1
stations and six FM2 stations).
To set a station:
• Turn the radio on.
• Select the band.
• Tune in the desired station.
• Press and hold one of the six
numbered buttons until you hear one
beep; then release the button.
• The station is now preset.