Table of Contents
Advertisement
TRENDnet User's Guide
Ethernet Connection Type: The connection applied on the access point.
o
IP Address: The management IP of system. By default, it's 192.168.2.254.
o
IP Netmask: The network mask. By default, it's 255.255.255.0.
o
IP Gateway: The gateway IP addresses and by default, it's 192.168.2.1.
o
Primary DNS: The primary DNS server in service.
o
Wireless Information: Display total received and transmitted statistics on available
•
Virtual AP.
WiFi: Wireless status of the access point.
o
Band: Operating wireless band of the access point.
o
Channel: Operating channel of the access point.
o
Current Tx Power: Transmit power of the access point.
o
Data Rate: Current wireless data rate of the access point.
o
Extra Information
Users could pull out information such as Route table, ARP table, MAC table, Bridge table
© Copyright 2014TRENDnet. All Rights Reserved.
or STP available in the drop-down list from system. The "Refresh" button is used to
retrieve latest table information.
Route table information: Select "Route table information" on the drop-down list
•
to display route table. TEW-738APBO could be used as a L2 or L3 device. It doesn't
support dynamic routing protocols such as RIP or OSPF. Static routes to specific
hosts, networks or default gateway are set up automatically according to the IP
configuration of system's interfaces. When used as a L2 device, it could switch
packets and, as L3 device, it's capable of being a gateway to route packets inward
and outward.
ARP table Information: Select "ARP Table Information" on the drop-down list to
•
display ARP table. ARP associates each IP address to a unique hardware address
(MAC) of a device. It is important to have a unique IP address as final destination to
switch packets to.
TEW-738APBO
33
Advertisement
Table of Contents
