Table of Contents
Advertisement
TRENDnet User's Guide
CPE + AP Mode (Router Client + Access Point)
It can be used as an Outdoor Customer Premised Equipment (CPE) to receive
wireless signal over the last mile, helping WISPs deliver wireless broadband Internet
service to new residential and business customers. In this mode, theTEW-738APBO
is a gateway with NAT and DHCP Server functions. The wireless and wired clients of
TEW-738APBO are on the different subnet from Main Base Station and it accepts
wireless connections from client devices.
© Copyright 2014TRENDnet. All Rights Reserved.
Web Management Interface Instructions
TEW-738APBO supports web-based configuration. Upon the completion of hardware
installation, TEW-738APBO can be configured through a PC/NB by using its web browser
such as Internet Explorer version 6.0.
• Default IP Address : 192.168.10.100
• Default IP Netmask : 255.255.255.0
• Default User Name and Password : admin/admin
Step
• IP Segment Set-up for Administrator's PC/NB: Set the IP segment of the
administrator's computer to be in the same range as TEW-738APBO for accessing
the system. Do not duplicate the IP Address used here with IP Address of TEW-
738APBO or any other device within the network
Example of Segment:
The valid range is 1 ~ 254 and 192.168.10.254 shall be avoided because it is already
assigned to TEW-738APBO. 192.168.10.10 is used in the example below.
IP Address : 192.168.10.10
o
IP Netmask : 255.255.255.0
o
• Launch Web Browser
Launch web browser to access the web management interface of system by
entering the default IP Address, http://192.168.10.100, in the URL field, and then
press Enter.
• System Login: The system manager Login Page then appears.
Enter "admin" as User name and "admin" as Password, and then click OK to login
to the system; the root manager account is used as an example here.
• Login Success: System Overview page will appear after successful login.
TEW-738APBO
11
Advertisement
Table of Contents
