Table of Contents
Advertisement
3.8 Fault warnings and resetting the boiler
If a fault occurs, a flashing warning code appears on the display.
The fault warnings appear on the main display (figure 1 a) together with the
symbol (Figure 4).
To reset, press the reset
button for at least two seconds.
Figure 4
Fault warnings appear on the secondary display (figure 1 b) alternating with the time, both of them flashing
(figure 4.1). It is not possible to reset malfunction warnings which appear on the secondary display as the cause
of the alarm has first to be removed.
Figure 4.1
InstructIons pertaInInG to the user
912.823.1 - GB
10
Advertisement
Table of Contents
