Miele DA 6296 W Operating And Installation Instructions page 35

a 3 protective sheets
for use when fitting the tower.
b 1 floating bracket
for exhaust ducting  150 mm.
c 1 reducing collar
for exhaust ducting  125 mm.
d 1 non-return flap
for fitting into the exhaust
connection on the motor unit (not
needed for recirculation mode).
e Telescopic wall bracket
for securing the rangehood to the
wall.
f Conversion kit for recirculation
mode
including directional unit, flexible
aluminium hose and hose clips (the
conversion kit is not supplied. It is
available as an optional extra - see
"Technical data").
6 screws 5 x 60 mm and
6 plugs 8 x 50 mm
for securing the wall bracket.
The screws and plugs are designed
for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure the wall is able to take the
weight of the rangehood.
2 x M 6 self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm
for securing the tower.
1 lever
for dismantling the tower.
Installation instructions
Installation
35