Storage; Maintenance - Morphy Richards power steamPro clean+steem User Manual

VC720503MUK Rev1_Instruction Book 09/08/2013 09:30 Page 9

Storage

We recommend storing the steam cleaner in the
carpet glider (30), but with the cloths removed.
Swing the upright handle
collapsible handle release/restore button (5).
Rotate the upper cord storage hook
upwards position. Wrap the power cord
around the two cord storage hooks (4/21).
Secure the cord in place using the power cord clip
(18).

Maintenance

WARNING: Always unplug the steam cleaner
from the mains supply before undertaking any
maintenance procedures.
Maintaining the motorised floor brush (27)
Ensure the power cord
mains outlet.
Remove the dust tray (24).
Lay the appliance flat on a stable surface and turn
it over so the underside of the floorhead
facing upwards to enable you to inspect the
motorised floor brush. Pull away any hairs or
fibres. If they are tightly wound around the brush,
carefully snip the fibres with scissors, being
careful not to damage the motorised floor brush,
pull away from the motorised floor brush and
dispose of in a bin.
(3) down by pressing the
(4) to an
(17)
(17) is unplugged from the
(22) is
It may be necessary to clean the motorised floor
brush more thoroughly by removing it. To do this,
first remove the motorised floor brush viewing
window (26), to do this, pull away the catches
next to the two wheels and lift away the viewing
window.
Next, lift out the motorised floor brush end cover
(32) by pushing in the clip (33).
Lift out the motorised floor brush
(35) first and slip the belt (37) off from the floor brush.
Then pull out the other end of the floor brush (34).
(31)
(27) at the belt end
37
9