Table of Contents
Advertisement
70536 rev1 version2
Jet nozzle
1
Push the jet nozzle directly onto the
jet nozzle adaptor and turn in a
clockwise direction to lock into
place O.
2
It can be used with various fittings,
eg. the angled nozzle and small
and large brush attachments,
depending on the task.
•
The jet nozzle can be used with
various fittings for cleaning
inaccessible areas such as corners,
joints, blinds, radiators and toilets
as well as various surfaces such as
stainless steel, windows, mirrors,
enamelled surfaces and also for
stain removal.
Brush attachments
Ò
1
Choose the desired plastic or metal
brush attachment for the task P.
2
Fit the brush attachment onto the
jet nozzle by pushing on.
Pull to remove.
3
IMPORTANT: Do not use the brass
brush on grouting or delicate
surfaces. Always test a hidden area
before using steam on any surface.
Upholstery
attachment
1
Fit the rectangular upholstery
steam nozzle to the jet nozzle
adaptor by pushing on and turning
clockwise to lock Q.
2
This nozzle can be used with or
without the cotton cover Í.
3
Turn anti-clockwise and pull to
remove.
•
This nozzle is ideal for cleaning
cushions, carpets and car seats.
IMPORTANT: Always test on a
hidden area before you start. Steam
cleaning may not be suitable for
certain fabrics such as dralon due
to the high temperature of the
steam.
6 6
F F o o r r A A d d v v i i c c e e , , S S p p a a r r e e s s o o r r A A c c c c e e s s s s o o r r i i e e s s , , t t e e l l : :
7/9/07
14:42
Page 6
Window squeegee
Ú
attachment
1
Locate the window squeegee onto
the two tabs at the bottom of the
upholstery nozzle. Then push the
top of the squeegee until the clip
goes over the top of the upholstery
nozzle R.
•
This attachment is ideal for cleaning
windows, mirrors, ceramic tiles and
other non porous smooth surfaces.
•
Apply the steam evenly to the glass
surface from a distance of 10-15
cm. Then switch the steam off and
wipe the moisture off the glass from
top to bottom using the rubber
squeegee. Wipe the rubber
squeegee and the lower edge of
the window. Dry after every strip.
IMPORTANT: Glass surfaces can
be shattered by the sudden
application of excessive heat. Warm
glass surfaces first from a distance
of 20-25 cm. Continue at a
distance of 10-15 cm.
HINTS AND TIPS
Tube park
•
During use the tubes and nozzle
can be stored in the park position
for short breaks whilst cleaning S.
È
Tool storage cart
The cleaner may be used with or
without the storage cart.
Press the button at the rear of the
cleaner and lift to remove the boiler
from the cart T.
The accessories for your steam
cleaner can be neatly stored in the
cart.
When replacing the steam cleaner
on the cart put hose inlet end „ in
first, then with a firm downward
motion push till the button at the
back of the cart goes in then out, a
click will be heard.
Cord storage
There is a cord storage facility on
the bottom of the cart. With the
cleaner on its heel, pull-out the
Î
0 0 8 8 4 4 5 5 0 0 7 7 7 7 7 7 7 7 0 0 0 0 ( ( U U K K ) )
o o r r
1 1 8 8 0 0 0 0 4 4 0 0 9 9 1 1 1 1 9 9 ( ( I I r r e e l l a a n n d d ) )
O
P
Q
R
S
T
Advertisement
Table of Contents
