Removal and Replacement Procedures - Ultra-Slim Desktop (USDT) Chassis
8.3.2 Bottom Access Panel
1. Prepare the computer for disassembly (Section 8.1).
CAUTION: Before removing the computer access panel, ensure that the computer is turned off and that
Ä
the power cord is disconnected from the electrical outlet.
2. Lay the computer down so the rubber feet face upward.
3. Loosen the captive thumbscrew 1 that secures the access panel to the computer chassis.
4. Slide the bottom access panel back about 1/2 inch (1.3 cm), then lift it off the unit 2.
To install the access panel, reverse the removal procedure.
8–6
336492-003
Service Reference Guide