When The Function Status Indicator Lights Up In Red - Infotec MP C1500 Operating Instructions Manual

When the Machine Does Not Operate as Wanted
When the Function Status Indicator Lights
Up in Red
1
If a function key is lit in red, press the key to switch to the screen for the corre-
sponding function, and then follow the message that appears.
Problem
Documents and reports
do not print out.
An error has occurred.
The machine is unable
to connect to the net-
work.
Note
❒ If an error occurs in the function you are using, check the message that ap-
pears on the control panel, and then refer to "When a Message is Displayed"
for the relevant function.
Reference
p.11 "Troubleshooting When Using the Copy Function".
p.21 "Troubleshooting When Using the Facsimile Function".
p.39 "Troubleshooting When Using the Printer Function".
p.59 "Troubleshooting When Using the Scanner Function".
4
Cause
There is no copy paper left.
There is a problem with the func-
tion whose key is lit red.
A network error has occurred.
Solution
Add more paper. See p.71 "Load-
ing Paper".
Record the code number shown
in the display and contact your
service representative. See
"When A Message Displayed" of
each chapter. Other functions are
available normally.
• Check the displayed message
and take an appropriate ac-
tion. See "When A Message
Displayed" of each chapter.
• Check that the machine is cor-
rectly connected to the net-
work, and that the machine is
correctly set. See "Network
Settings", General Settings
Guide.
• Contact the administrator.
• When the function key is still
lit in red, even if you take the
measures above, contact your
service representative.