Dual Unit Setup - Russound D250LS Installation Manual

DUAL UNIT SETUP

The D250LS can be used in a side-by-side configuration using the optional
rack mounting kit. This feature makes it easy to add amplification to two
controllers or two zones (e.g., on the MCA-C5 controller).
The example shown features two D250LS amps connected to an MCA-C5,
zones 7 and 8. One amp adds power through bridged mode for an outdoor
zone. The other amp powers a pair of speakers in a zone for normal operation.
D250LS Amplifier
Connections for bridged mode operation
10
RCA Cable
(-)Negative
(+)Positive
Speaker Cable
8 Ohm Speaker
Configuration showing 2 D250LS Amplifiers using optional rack mount kit
Russound D250LS Installation Manual
RCA Cable
D250LS Amplifier
Connections for normal operation
4-8 Ohm Speakers
MCA-C5 Controller
Rev. 2