Table of Contents
Advertisement
6. To remove high voltage capacitor.
(1) Remove a screw which secure the grounding ring terminal
of the H.V.diode and the capacitor holder.
(2) Remove the H.V. diode from the capacitor holder.
(3) Reverse the above steps for reassembly.
High voltage circuit wiring
7. To remove magnetron.
(1) Remove a screw which secure the magnetron.
(2) Remove the magnetron.
(3) Reverse the above steps for reassembly.
CAUTION
N ever install the m agnetron w ithout the m etallic gasket plate w hich is packed w ith each m agnetron to prevent m icro-
w ave leakage. W henever repair w ork is carried out on m agnetron, check the m icrow ave leakage. It shall not exceed
2
4m W /cm
for a fully assem bled oven with door norm ally closed.
DISASSEMBLY AND ASSEMBLY
Advertisement
Table of Contents
