Instrument Cluster; Indicator Lamps - Polaris RANGER XP 900 Owner's Manual

Instrument Cluster

High water pressure may
damage components. Wash the
vehicle by hand or with a
garden hose using mild soap.
Do not use alcohol to clean the
instrument cluster. Do not
allow insect sprays to contact
the lens.
Speedometer
The speedometer displays
vehicle speed in either miles
per hour (MPH) or kilometers
per hour (km/h). See page 36.

Indicator Lamps

Lamp Indicates
Vehicle Speed
Over Temperature
EPS Warning (if
equipped)
Neutral
High Beam
Helmet/Seat Belt
Check Engine
FEATURES AND CONTROLS
Speedometer
Rider
Information
Center
When standard mode is selected, speed displays in miles per hour.
When metric mode is selected, speed displays in kilometers per hour.
This lamp illuminates to indicate an overheated engine. If the
indicator flashes, the overheating condition remains, and the system
will automatically reduce engine power.
This indicator illuminates briefly when the key is turned to the ON
position. If the light remains on, the EPS system is inoperative. See
your authorized POLARIS dealer for service.
This lamp illuminates when the transmission is in neutral and the
ignition key is in the ON position.
This lamp illuminates when the headlamp switch is set to high beam.
The lamp is a reminder to the operator to ensure all riders are
wearing helmets and seat belts before operating. The driver's seat
belt is equipped with a seat belt interlock. Vehicle speed will be limited
to 15 MPH (24 km/h) if the seat belt is not secured.
This indicator appears if an EFI-related fault occurs. Do not operate
the vehicle if this warning appears. Serious engine damage could
result. See your dealer.
Condition
Indicator
Lamps
MODE
Button
33