Installation Instructions - GE GTMP280EDWW Use And Care Manual

PROPER INSTALLATION
it is used, present in this manual.
Properly ground dryer to conform to all governing
codes and ordinances. Follow details in
Installation Instructions section.
Install or store where it will not e e posed to
temperatures elow free ing or e posed to the
weather.
onnect to a properly rated, protected and si ed
power supply circuit to avoid electrical overload.
emove the protective lm from oth the control
panel and the door.
Remove all sharp packing items and dispose of all
shipping materials properly.
o not remove the vent protector from the ack
of the dryer. Pull the protector out and down to its
lowest position and connect the exhaust duct to
the dryer. The lowered protector will prevent the
duct from getting crushed.
www.GEAppliances.ca
Exhaust/Ducting:
Dryers MUST e exhausted to the outside to
1
prevent large amounts of moisture and lint from
eing lown into the room.
se only rigid metal or exi le metal 1 cm 4
2
diameter ductwork inside for exhausting to the
outside.
USE OF PLASTIC OR OTHER COMBUSTIBLE
DUCTWORK CAN CAUSE A FIRE. PUNCTURED
DUCTWORK CAN CAUSE A FIRE IF IT COLLAPSES
OR BECOMES OTHERWISE RESTRICTED IN USE
OR DURING INSTALLATION.
For complete details, follow the Installation
Instructions.
3